Find glove size based on age
A 5- or 6-year-old requires a glove that is 10 to 10 1/2 inches. A 7- or 8-year-old needs a glove that is 10 1/2 to 11 inches. A 9- to 12-year-old needs a glove that is 11 to 11 1/2 inches. A high school-aged child normally wears a glove between 10 1/2 to 11 1/2 inches.
What age is a 12 inch glove for?
BASEBALL BAT, SOFTBALL BAT, AND GLOVE SIZE CHARTS
Kids 12 and Under: No larger than 12 inches. Kids 8 and older should try gloves in the 11s, while younger kids (especially if they are smaller) should consider gloves in 9 to 11 inch range.
How do you size a baseball glove for a toddler?
Properly Size the Glove: T-ball and baseball gloves are measured from the heel of the glove (just below the palm) to the top of the glove (just above the index finger). Gloves range in size from 8 to 15 inches. T-ball gloves are typically at the lower end of the size spectrum, from about 8 to 9.5 inches.
What age is a 9-inch glove for?
THEN, FOLLOW THE GENERAL GUIDELINES ON SIZE, BASED ON AGE AND SPORT: Pre-T-ball players under age 5: 9-inch glove. T-ball, ages 5 to 7: 9- to 11-inch glove. Youth baseball, ages 8 to 12: 10- to 12-inch glove.
How do you pick a baseball glove size?
To determine the size of a baseball glove, measure from the tip of the index finger along the palm to the heel of the glove. Most baseball gloves don’t measure greater than 12.5 inches. When looking for a catcher’s mitt, you’ll notice that the sizing of the glove is between 32.5 to 34 inches.
How is a baseball glove measured?
Every baseball mitt has the size etched in the leather on the thumb or pinky finger of the glove. Manufacturers measure their creations from the top of the index finger and move down along the glove until it reaches the center of the heel. That length is how the glove’s size is determined.
What size should a first base glove be?
A typical first baseman’s mitt will be between 12″ and 13″. Make sure to not oversize the mitt, however, as you want to be able to control it during play. This is especially vital in purchasing a first baseman’s mitt for younger players.
Can I use a softball glove for baseball?
Although it’s possible to play baseball using a softball glove, traditionally, it’s not recommended. You can probably get by with using a softball glove if you play baseball recreationally or just for fun, but at a more serious level of competition, it puts you at a disadvantage.
Are baseball and softball gloves the same?
Baseball and Softball glove models are designed differently to accommodate the size of the game ball. For example, a baseball is only 9 inches in size and a baseball glove is designed to catch and hold that size, whereas a softball could be 11 or 12 inches, so these gloves have a larger pocket.
What is the smallest size baseball glove?
For baseball players, utility gloves range in size from 11”-12” for youth and 11.75”-12.5” for adults. Fastpitch utility gloves typically range from 11.5”-12”, and slowpitch utility gloves can be up to 13” in length.
How do you pick a Little League baseball glove?
Some general guidelines to consider when selecting a baseball glove:
- Select a glove that fits.
- Choose the right glove for your position.
- Choose a versatile glove.
- Check for durability and quality leather.
- Shop for a glove that fits your price range.
- Make sure your glove has the right webbing, and other parts.
What do you need for Tball?
Equipment that will be provided to each team includes helmets, bats, balls, and catcher’s equipment. Additionally, each player should be provided with a uniform shirt and hat. Items that typically need to be purchased by the parent include a glove, baseball/softball pants, and cleats.
What is a normal size baseball glove?
The standard size for a baseball infield glove is 11.25 to 12 inches, and 11.5 to 12.5 inches for softball.
How do I measure my hand for gloves?
Pass a tape measure around the widest part of your hand – usually over your knuckles, excluding the thumb. The result, in inches, is your glove size – e.g. if your hand measures 7 inches, you are a glove size 7. If you are between two sizes, round down to the lower of the two.
What size bat do you need for Tball?
It may also be specified as a Tball bat. It should be of a length of between 24 inches and 26 inches. The taller your child is, the taller their bat should be. The most common length for a Tee ball player is a 25 inch bat.
Is a 14 inch baseball glove too big?
Shortstops and second basemen generally use gloves anywhere in the 11-inch range, and outfielders will use gloves as big as 14 inches. Softball players probably won’t use any glove smaller than 12 inches. Anything smaller than that, and the glove will have trouble handling the softball.
What size is a youth catchers mitt?
Typically, fielder’s gloves can range from 10” to 14”, depending on age-group and sport. Catcher’s mitts, on the other hand, can range from 30” to 35”, also depending on age-group and sport. Youth catchers will want a mitt that is 31” and under. Adults will want a mitt that’s 32” and over.
How should a baseball glove fit wrist?
How to Adjust the Fit of a New Ball Glove
What size glove does my daughter need for softball?
Because the softball is 11″, you will typically see fastpitch infielder gloves ranging between 10″ and 11.5″ for youth players and roughly 11.5″ and 12.5″ for players ages 13 and older. If you play slow pitch softball, your glove size will be bigger because the ball is 12″.
What is a medium glove size?
7.5”-8.5”
| Actual Hand Measurement | Alpha Glove Size |
|---|---|
| 6.5”-7.5” | Small |
| 7.5”-8.5” | Medium |
| 8.5”-9.5” | Large |
| 9.5”-10.5” | XL |
What does left hand throw mean?
LHT – Left hand thrower. Means the player throws with his or her left hand and wears the glove on the right.
How do you measure a child’s hand for a baseball glove?
Place the child’s hand palm-side down on a table or other solid surface. Next, Measure from the base of your child’s index finger to the finger tip. Measure in inches. Add two inches to the measurement you have.
Why is 1st base glove different?
The first base glove is different from other infield gloves – it is larger and doesn’t have finger holes. It also has a unique curved style to the edge that is useful when picking and scooping balls thrown in the dirt. Like the catcher’s mitt its large size gives the other infielders a larger target at which to throw.
Is 11.25 glove too small?
11.25” inches is a great size for the middle infield. It allows for the middle infielder’s dream shallow pocket. The perfect weight for fielding ground balls and reacting to bad hops.
Is there a difference between baseball and softball first base glove?
The Design
A regulation baseball is only 9” and a regulation softball is about 12”. So, baseball gloves are made with a smaller and longer pocket since the ball is smaller, whereas the pocket of a softball glove is deeper and shorter since the ball is larger.
What is a slow pitch glove?
Slow Pitch Softball Gloves are gloves manufacturers produce with softball-specific patterns. While larger-sized baseball gloves can work for Slow Pitch softball, Slow Pitch Gloves range from 12.00 inches to 15.00 inches and have pockets tailor-made to catch a softball.
Is it harder to hit a softball or a baseball?
While baseballs are thrown at a higher speed and can be more difficult, the smaller field in softball gives the batter less time to react
making it more difficult to hit the ball. Even though speed and distance do play a large factor, it’s not the biggest.
Can you use a softball bat for baseball?
More importantly, you should not and cannot use a softball bat for baseball because a bat is crafted specifically for the League it will be used in. So, softball bats are almost all 2 1/4″ in diameter at the barrel, but they also are constructed differently in terms of weight distribution.
What’s the difference between a baseball glove and a baseball mitt?
Baseball Mitts The main difference between baseball gloves and mitts is that gloves have fingers and mitts don’t. Mitts tend to do a better job of controlling balls that don’t hit in the pocket and can aid scooping ground balls and short hops. First Base and Catcher are the only positions allowed to use mitts.
Is there a difference between baseball and softball catchers mitt?
Baseball catcher’s mitts run from 32 to 34.5 inches in circumference, while softball mitts run a little larger at 33 to 35 inches. And because the softball is so large, the fastpitch catcher’s mitt must have a suitably larger pocket.
